QSD Fire Systems delivers IFC-certified fire stopping and passive fire protection across Telford. From sealing service penetrations and fitting fire collars and dampers through to cavity barrier installation and remedial works, the firm restores compartmentation in residential buildings to IFC certification standards, with a full photographic handover record on every job.
A building that fails its fire inspection becomes the responsibility of whoever holds it, not the contractor who worked on it years before. Holding compartmentation together is what fire stopping does. Every point where a pipe, cable, duct or conduit passes through a compartment wall or floor has to be sealed with tested, certified materials, or fire and smoke spread between compartments and the building falls short of Approved Document B and the Regulatory Reform (Fire Safety) Order 2005.
Telford is a planned new town, built from the 1960s onwards across the old Shropshire coalfield. Its housing tells that story: large planned estates like Sutton Hill, Woodside, Brookside and Madeley, and a good deal of system-built and non-traditional construction from that era. Non-traditional housing has its own compartmentation weaknesses, and a lot of it is now managed by housing associations. That existing new-town stock is where fire stopping needs checking, and it is where QSD works.

Most Telford fire stopping jobs start with a problem already on record, unsealed penetrations noted in a fire risk assessment, an issue raised by a managing agent, or an enforcement visit from Shropshire Fire and Rescue Service. QSD picks the work up there: surveying the building, recording every breach in the compartmentation, carrying out the fire stopping installation and remedial works to put it right, and issuing the certified documentation.
We work with the people responsible for Telford’s residential buildings, landlords, HMO operators, managing agents and housing associations. The town’s planned estates and system-built stock need someone who understands how those buildings were put together. Whether it is a property on a Brookside estate or an older industrial-village home near the Ironbridge Gorge, the work is carried out to IFC certification standards. Talk to us about your building and we will tell you where you stand.

Responsibility for keeping a building’s fire compartmentation intact sits, under the Regulatory Reform (Fire Safety) Order 2005, with its responsible person. If fire stopping is missing or defective and the building fails an inspection, the building owner has to resolve it and holds the liability should the worst occur. QSD’s job is plain: keep the building from failing, and hand over the certified evidence that confirms it.
A QSD fire compartmentation survey in Telford identifies where a building’s compartmentation has been breached. Each unsealed service penetration, missing cavity barrier and patch of damaged or deteriorated fire stopping is recorded and set out as a prioritised report, ready for you to act on and to hand to an assessor or insurer.
The remedial fire stopping that follows reinstates compartmentation and brings the building back in line with Approved Document B. On Telford’s new-town estates and system-built housing it calls for an understanding of how those buildings were constructed and where their compartmentation tends to give way. A full photographic record of the sealed work is provided as proof.

Find out where your building’s compartmentation has been breached, with a prioritised report you can act on.
A full inspection of compartment walls, floors and ceilings to identify defective or missing fire stopping.
Certified fire stopping and remedial works for residential buildings across Wolverhampton.
Across Telford’s planned new-town estates and system-built housing, QSD works only on residential and passive fire protection. It is all we do, and we bring IFC certification, ISO 9001 quality management, CHAS and BAFSA membership to every project.
QSD’s Telford services take in fire stopping installation, fire compartmentation surveys, cavity barrier installation, fire collar and fire damper fitting, fire boarding, fire door inspections and remedial works, much of it on the new town’s planned and system-built estates. Each job is finished to IFC certification standards with a full photographic handover record.
Yes. Under UK building regulations (Approved Document B) and the Regulatory Reform (Fire Safety) Order 2005, fire stopping is required. The duty to maintain compartmentation against fire and smoke spread sits with the building’s responsible person, and Shropshire Fire and Rescue Service can enforce against a failure to meet it.
Yes. Much of Telford’s housing dates from its development as a new town and includes system-built and non-traditional construction. We carry out compartmentation surveys and fire stopping on that stock, which has its own particular weaknesses.
Telford’s 1960s and 70s stock often conceals decades of unrecorded alteration, so evidence matters. Our IFC certification, ISO 9001 quality management, CHAS and BAFSA membership stand behind every seal we fit, and the photographic handover shows the building’s responsible person exactly what was put right, the proof Shropshire Fire and Rescue Service or an insurer would look for.
Including: Cheshire, Chester, Conwy, Gwynedd , Mold, Wirral, Ellesmere Port, North Wales & beyond even to places like Birmingham
